Reset - Canon Printers

Written on 9:50 by Cristian

Hello Friends I collaborate if I could donate can donate 1 dollar no matter it is just to continue my study to my knowledge I can share with you all thanks a lot ..

Canon printers, Epson and others have a control system using counter, whereby an estimate made according to the number of impressions to determine the level of ink cartridge that is displayed on screen or to calculate whether the ink residual "Waske" is full. When calculating this full, which is not necessarily correct, the printer is locked to be taken to a service and is cleaned again and reset this counter. What we can do for now is to assume that the counter is actually advanced and not yet full of residual ink and reset this counter. this will be valid until they actually become full of ink and that there will be more than the RESET block again. Well, without more, the procedure to reset it using the buttons on the printer.

Turn the printer
Holding the button Resume / Cancel press the POWER button.
Keep them pressed. The power light remains green.
Release the button Resume / Cancel still hold the POWER button.
Press the Resume / Cancel again twice more, holding the POWER yet. Done this release both buttons.
When the indicator stays green press the Resume / Cancel 4 times!
Turn the printer off using the POWER button.

This method applies to some other Canon printer models

STEPS: IP 1000 - IP 1500

You take away the power cable from the printer.
Press the power button and plug the power cable, holding down the power button (the power light goes green).
Still holding down the power button and press the other button (the color of the light changes to orange) and loose (you keep pressing the power button).
And finally we continue the power button pressed, turn to press the other button and the color of the light changes to green, and loose the two buttons at once.

All steps must be followed sequentially, if it does not work is not well lohacen.